{{ variable.name }}
Hot-dip galvanized structural steel tower for antennas, RRUs, feeders and microwave equipment. Typical heights of 30 m to 60 m, with antenna platforms, climbing and cable ladders, mounts, lightning protection and foundation interface configured to your project antenna load schedule and local wind load requirements.

This communication tower is a project-specific telecom structure manufactured from hot-dip galvanized structural steel. It is used to support antennas, RRUs, feeders and microwave equipment for 4G and 5G networks, utility communications and industrial sites. Each tower is engineered against an agreed antenna load schedule and the local wind load requirement, then supplied as modular bolted sections with a matched accessory package so that site erection, cabling and lightning protection are handled as one interface.
Platform layout, mount positions and load capacity are set from the antenna load schedule you provide, so the tower matches the tenant and equipment plan of the site.
Standard design work covers the 30 m to 60 m range with project-specific heights; 50 m and 60 m tower batches have already been delivered and accepted.
Galvanizing inspected to ASTM A123/A123M, with ASTM A153/A153M for applicable hardware and EN ISO 1461 when specified, for humid and coastal exposure.
Sections are divided to suit transport limits and assembled on site, keeping logistics practical for remote and container-shipped projects.
Antenna platforms, climbing ladder, cable ladder, mounts, lightning protection and foundation interface are supplied as one coordinated package.
Proof and ultimate load verification to IEC 60652 and/or the project utility specification can be arranged at an approved tower testing center.
| Tower Type | Telecom monopole, tubular communication tower, lattice communication tower or 5G signal tower, selected per project |
|---|---|
| Typical Height | 30 m to 60 m, project-specific; 50 m and 60 m batches delivered |
| Material | Hot-dip galvanized structural steel (Q235B / Q355B) |
| Galvanizing Standard | ASTM A123/A123M; ASTM A153/A153M hardware; EN ISO 1461 when specified |
| Structural Design | PLS-POLE / PLS-TOWER and project-specific structural design |
| Antenna Platform | Customized to the antenna load schedule |
| Climbing Ladder | Customized, supplied with the tower package |
| Cable Ladder | Customized, supplied with the tower package |
| Lightning Protection | Customized to project requirement |
| Foundation Interface | Customized anchor bolt and base interface |
| Wind Load | Structure designed according to local wind load requirements |
| Structural Verification | Full-scale proof/ultimate load test to IEC 60652 and/or project specification, on request |
| Service Life Reference | 30 to 50 years in project case records |
| Management Systems | ISO 9001, ISO 45001, ISO 14001 |
Single-shaft tower configuration for telecom sites, with platform and mount details defined by the antenna load schedule.
Tubular steel sections supplied in transportable lengths with bolted site connections and matched accessories.
Lattice configuration specified where the project design calls for it, engineered for the same antenna and wind load inputs.
Signal and small-cell site structure, configured with the mounting and cabling items required by the network plan.
Model, height and accessory list are confirmed during project design against your load schedule, wind data and transport limits.
Communication towers are supplied for telecommunications operators and tower companies expanding 4G and 5G networks, for utility communications and for industrial sites. Towers are designed for demanding conditions such as high wind, tropical rain and coastal exposure, where the antenna load schedule, wind load and corrosion protection are agreed before fabrication.
Client type: Telecom / infrastructure customer. Scope: 50 m and 60 m communication tower batches for telecom network infrastructure. Engineering: structure designed according to local wind load requirements, with complete accessory matching and full technical document support for site deployment. Result: the customized communication tower met network construction requirements and passed client acceptance for stable site operation; service life reference of 30 to 50 years.
Typical customized heights are 30 m to 60 m, and heights are project-specific. Batches at 50 m and 60 m have been delivered and accepted.
Yes. Antenna loading is customized, and the structure is designed according to the local wind load requirements of the site. Platform and mount positions follow the agreed load schedule.
Hot-dip galvanized structural steel, typically Q235B / Q355B. Galvanizing is inspected to ASTM A123/A123M, with ASTM A153/A153M for applicable hardware and EN ISO 1461 when the project specifies it.
Antenna platforms, climbing ladders, cable ladders, mounts, lightning protection and the foundation interface are all customized and can be supplied as one matched accessory package.
Full-scale proof and ultimate load testing to IEC 60652 and/or the project utility specification can be arranged at an approved tower testing center, with a test report specific to the tower design.
The structure is divided into modular bolted sections to suit transport limits, which keeps handling practical for container and remote-site logistics.
Full technical document support is provided for site deployment, including design drawings and inspection records. ISO 9001, ISO 45001 and ISO 14001 management systems apply to production, and SGS and TUV third-party inspection documents are available in English.
Send your antenna load schedule, required height, local wind load data and transport limits for a project-specific proposal.
Address: No.1 Yinhe Road, Wanshi Town, Yixing, Jiangsu, China
Tel: +86-510-87841888 | WhatsApp: +86 130-1366-6666
Email: zjw@yin-he.com